PRESTO W85 - JULABO USA

PRESTO W85 & W85t

Temperature Control Systems

Part Number: 9421852

JULABO PRESTO® Highly Dynamic Temperature Control Systems for highly precise temperature control of external applications. Systems offer rapid heating and cooling rates for fast compensation of external events. The hydraulically sealed heat exchanger design afford a wide working temperature range without changing fluids. All units feature a 5.7″ industrial color TFT touch screen interface for unit operation, external integration and programming.
These instruments cover a working temperature range of -30 to +250°C to -92 to 250 °C. Up to three user levels with password managment enable safe, repeatable operation. Systems incorporate USB (host and device), Ethernet, SD-card slot, RS232 port, stand-by input and Pt100 external temperature sensor port.
The graphite bearing centrifugal pressure pump is lubricated by the bath fluid. All models (except for A30) can operate under pressure control to safeguard pressure sensitive applications (such as jacketed glass reactors).
Air and water-cooled versions available. Use only with approved JULABO fluids. Systems can operate with silicone fluids (Thermal P60 and Thermal P90) and HFEs (Fluorinert® and Galden®). Single stage PRESTO systems can operate with 1:1 ethylene glycol/water mixtures from -30 to +90 °C. Additional accessories available.

Part Number
9421852.16
9421852.16.T
9421852.16.T.CSA/UL
Voltage Version
230V/3PPE/60Hz
230V/3PPE/60Hz
230V/3PPE/60Hz
NRTL
No
Yes
Refrigerant
R507/R23
R507/R23
R507/R23
Heating & Cooling
Both
Both
Both
Working Temp Range (°C)
-85...250
-85...250
-85...250
PCF Pressure (psi)
1.5...43.5
1.5...43.5
1.5...43.5
PCF Rate (l/min)
0...80
0...80
0...80
Part Number
9421852.16
9421852.16.T
9421852.16.T.CSA/UL
Working Temp Range (°C)
-85...250
-85...250
-85...250
Heating Capacity (kW)
5.5
12.5
12.5
Cooling Capacity
°C -80-60-40-30-20020200
kW 0.42.22.42.42.42.42.52.8
°C -80-60-40-30-20020200
kW 0.42.22.42.42.42.42.52.8
°C -80-60-40-30-20020200
kW 0.42.22.42.42.42.42.52.8
Voltage Version
230V/3PPE/60Hz
230V/3PPE/60Hz
230V/3PPE/60Hz
Power A
30A
55A
55A
Plug Type
Pump Connection
M30x1.5 male
M30x1.5 male
M30x1.5 male
NRTL
No
Yes
PCF Pressure (psi)
1.5...43.5
1.5...43.5
1.5...43.5
PCF Rate (l/min)
0...80
0...80
0...80
Bath Fill Volume (L)
External Devices
Pt100|Remote Control
Pt100|Remote Control
Pt100|Remote Control
Fluid Type
Silicone, Fluorinert/Galden
Silicone, Fluorinert/Galden
Silicone, Fluorinert/Galden
Heating & Cooling
Both
Both
Both
Dimensions W x L x H (in)
24.1 x 33.3 x 49.3
24.1 x 33.3 x 49.3
24.1 x 33.3 x 49.3
Weight (lbs)
738.6
738.6
738.6
Refrigerant
R507/R23
R507/R23
R507/R23
  • For highly precise, external temperature applications
  • Rapid heating and cooling
  • Fast compensation of exothermic reaction
  • Wide working temperature ranges without changing fluids
  • Highest performance with small footprint
  • Space-saving design optimizes space utilization in your lab
  • NEW 5,7” industrial color TFT touch screen
  • well-organized view of important information with unmatched, intuitive user friendliness
  • Up to 3 user level with password management
  • NEW USB (Host und Device)
  • NEW Ethernet
  • NEW SD-Card slot
  • RS232 / optional RS485 / optional Profibus DP
  • Stand-by input
  • Filling system accessible from the top
  • Adapters
    Adapter 8891711 M30x1.5 m to m $196.00 View
    Elbow fittings 8891721 M30x1.5 f/m $475.00 View
    M30 nuts 8970496 $185.00 View
    Twin distributing adapter 8890142 M30x1.5 f to 2x M30x1.5 m $600.00 View
    Quad distributing adapter 8890143 M30x1.5 f to 4x M30x1.5 m $1,030.00 View
    Twin distributing adapter 8890132 M30x1.5 f to 2x M30x1.5 m $798.00 View
    Quad distributing adapter 8890133 M30x1.5 f to 4x M30x1.5 m $1,597.00 View
    Adapter 8890068 M24x1.5 f to M30x1.5 m $381.00 View
    Adapter 8890069 M24x1.5 m to M30x1.5 f $449.00 View
    Adapter 8890070 M24x1.5 f to M30x1.5 f $465.00 View
    Adapter 8890080 M30x1.5 f to M38x1.5 m $419.00 View
    Adapter 8890082 M30x1.5 f to M38x1.5 f $474.00 View
    Adapter 8890083 M30x1/5 f to NTP 3/4″ m $380.00 View
    Adapter 8890084 M30x1.5 f to NPT 3/4″ f $359.00 View
    Adapter 8890085 M30x1.5 f to NPT 1″ m $359.00 View
    Adapter 8890086 M30 x 1.5 f to NPT 1″ f $359.00 View
  • Bath Fluids
    Thermal P90 5L $1,054.00 View
    Thermal P90 10L $2,031.00 View
    Thermal P60 5L $1,171.00 View
    Thermal P60 10L $2,186.00 View
  • Boosters
    Booster Pump for PRESTO units 8810020 $9,759.00 + View
  • Expansion Vessels
    PRESTO expansion vessel, 3L 8970833 $1,317.00 View
  • Filters
    Particle filter for cooling water cycle 8920000 $1,809.00 View
  • Hoses & Tubing
    Vacuum insulated metal tubing, 2m, M30x1.5f $1,334.00 View
    Vacuum insulated metal tubing, 3m, M30x1.5f $1,743.00 View
    Vacuum insulated metal tubing, 5m, M30x1.5f $2,535.00 View
    Tube clamps 12mm 8970482 $36.00 View
    Reinforced tubing 8930312 12mm ID $68.00 View
    Metal tubing 8930271 1m M30x1.5f $1,207.00 View
    Metal tubing 8930272 1.5m M30x1.5f $1,517.00 View
  • Networking & Software
    Profibus DP Interface 8900020 $2,296.00 View
    RS485 Interface 8900024 $2,296.00 View
    PRESTO Electronic module 8900105 $864.00 View
  • Plugs
    External Pt100 connector 8980131 $108.00 View
    Standby-plug 3 pole 8980133 $35.00 View
    Alarm plug 5 pole 8980135 $35.00 View
    REG EPROG-plug 6 pole 8980136 $35.00 View
  • Sensors
    24″ SS Pt100 sensor 8891001 $779.00 View
    24″ PTFE Pt100 sensor 8891002 $863.00 View
    36″ SS Pt100 sensor 8891003 $860.00 View
    36″ PTFE Pt100 sensor 8891004 $1,112.00 View
    48″ SS Pt100 sensor 8891005 $1,110.00 View
    48″ PTFE Pt100 sensor 8891006 $1,239.00 View
    12″ SS Pt100 sensor 8891018 $522.00 View
    12″ PTFE Pt100 sensor 8891019 $849.00 View
    8″ SS Pt100 sensor 8891031 $493.00 View
    8″ PTFE Pt100 sensor 8891032 $802.00 View
    M30 in-line Pt100 sensor 8981022 $1,169.00 View
    Pt100 Extension cable 8981103 $466.00 View
    M30 Pressure Sensor $919.00 View
    20mm SS Pt100 sensor 8981006 $779.00 View
    PRESTO Pt100 module 8900106 $476.00 View
  • Valves
    M30 Shut-off valve 8970852 $783.00 View

PRESTO W85 Videos

Absolute Temperature Calibration (ATC) – PRESTO

Learn how to perform an ATC, or Absolute Temperature Calibration, on your PRESTO unit.

Analog Connections – Overview

In this video Electronics Service Team Leader, Nelson Hill, will discuss the various analog interface options that some of our products have as either optional or standard, including stand-by input (STAND-BY), alarm output (ALARM), and programmer input/temperature recorder output (REG+E-PROG).

Analog Connections – PRESTO

In this video Electronics Service Team Leader, Nelson Hill, will discuss the various analog interface options that apply to PRESTO units.

CERhost Software Program – PRESTO

Learn how to connect your PRESTO to the CERhost program, which duplicates the front screen controls on your computer at your desk.

Connecting to EasyTEMP Software – Ethernet Interface

Learn how to connect your PRESTO or MAGIO circulator to EasyTEMP using the Ethernet connection.

CoSpeed – PRESTO

In this video, Felix Silverio, Electronics Service Technician, will demonstrate how to manipulate CoSpeed on a PRESTO.

Data Logging – PRESTO

In this video you will learn how to record data from your PRESTO to a USB stick or an SD card. . This allows you to record data from the unit’s operation without having to connect it to a computer.

Downloading Black Box Data – PRESTO

Learn how to download black box data from the PRESTO product line. Make sure you have a USB stick no more than 2 GB large, formatted in FAT32 and make sure there are no other files on the USB stick.

External Pt100 Sensor Control – PRESTO

Learn how to set up your unit for external Pt 100 control, using a PRESTO product.

Flow Control Solutions – Installation

In this video, Nelson Hill will walk you through how to install a Flow Control Solution on your PRESTO unit.

Flow Control Solutions – Overview

In this video, Nelson Hill introduces you to our PRESTO Flow Control Solutions, including why you would need a flow controller for your application and which PRESTO units are compatible.

Flow Control Solutions – Programming

In this video, Nelson Hill will show you how to operate your Flow Control Solution, including the menu features on the PRESTO that are displayed when a flow controller is installed.

How-to fill your PRESTO temperature control system

Learn how to fill your PRESTO temperature control unit with bath fluid.

Internal Programmer – PRESTO

In this video, Nelson Hill explains how to use the internal programmer on a PRESTO temperature control system.

JULABO USA PRESTO Family of Products

Check out our PRESTO product line. It’s our most advanced temperature control system. Its closed bath system design and cold oil overlay technology allow you to do things you can’t do with traditional open bath systems.

Overview of PT100 Sensor, Bandlimits, Time Temp Data, and Black Box

In this video, Sr. Product Manager Mark Diener, talks about the importance of external temperature control using Pt100 sensor and monitoring the temperature in your glass reactor.

PRESTO A80 vs. PRESTO A80t

Welcome to JULABO. Today, I’d like to talk about the PRESTO A80 and A80t. They look identical and they both have the same temperature range from -80°C to 250°C. They both utilize the cold oil overlay, which enables a very broad temperature range with one fluid. If you’re doing cold temperature applications for cannabis workflow, the A80 will work well for you. It only requires a 20-amp, single-phase 208-to-200-volt outlet. So at -40°C, both models have 1.1kW of cooling power at -40°C and 650 watts of cooling power at -60°C. For cold temperature applications in the cannabis or hemp workflow, these are great hydrocarbon extraction cooling, crystallization, winterization, and anything that might need 1.1kW at -40°C. Also for ethanol extraction, it can be used for smaller-scale centrifuges, for example. On the high end, the A80t offers 2.8kW of heating power. So, you could use the PRESTO A80t for application in vessels up to 20-50 liters, if you will, for decarb. So, in that case, the PRESTO A80t could be used on a reaction vessel for decarb and then also for winterization before that. And, later on, then, you could do crystallization for example if you’re trying to make diamonds or other types of solid, high-purity isolate products. So, if you have any more questions, please click the link to learn more about the PRESTO A80 and A80t products. Thank you.

PRESTO Fill Procedure

Watch this video to learn the fill procedure with the PRESTO unit connected to a glass reactor.

PRESTO Pressure Limits

Watch this video to learn PRESTO pressure limit settings, especially if you’re using a jacketed glass reactor.

Remote Control – PRESTO

Learn how to set your PRESTO to be controlled using RS232, USB, or the Ethernet interface.

Selftune (External) – PRESTO

In this video, Felix Silverio, Electronics Service Technician, will demonstrate how to perform the selftune function with an external application on a PRESTO.

Selftune (Internal) – PRESTO

In this video, Felix Silverio, Electronics Service Technician, will demonstrate how to perform the selftune function with an internal application on a PRESTO.

Updating Configuration – PRESTO

In this video Senior Customer Service Support Technician, Mary Pop, will demonstrate how to update the configuration on our PRESTO temperature control systems.

Which industries use the PRESTO product line?

In this video, Sr. Product Manager Mark Diener discusses key industries that use PRESTO product lines. Mark talks about engineers and chemists in pharmaceuticals, automotive, aerospace, and cannabis markets and the type of applications that need a PRESTO in their lab.

Why is the PRESTO product line ideal for temperature control unit applications?

In this video, Sr. Product Manager Mark Diener, discusses why the PRESTO product line is ideal for temperature control applications, specifically because of the cold-oil overlay technology.